product description
Home/ Products/ ANEST IWATA /Painting Machine /Coating System /Coating Booth
Menu
ANEST IWATA
Painting Machine
ANEST IWATA BB type dry coating booth
ANEST IWATA Coating Booths.
Dry Coating Booth BB Type.
No need to worry about freezing because water is not used.

Applications
・Suppression of paint mist scattering
・Suitable for use in places where drainage treatment or piping is difficult to accomplish
●Newly developed V-type baffle plates (primary filter) and dedicated mounting plate offer improved maintainability.
 　The booth uses newly developed baffle plates and a dedicated mounting plate (patent pending for both). The number of baffle plates has been reduced to about a half, and the mounting plate is less prone to paint adhesion. These allow easy replacement of the parts.
●All the models suck air from across the outlet to achieve better suction performance.
　Even those models having an expanded hood with an outlet that is 0.5 m wider suck air from across the outlet, which enables them to suck air uniformly.
●Large cleaning/inspection door that can be attached on either side
　The booth has a cleaning/inspection door with a wider opening than that of the previous models. This gives easier access to the inside of the booth during cleaning.
●Fan guard set as a standard component
　The booth has a fan guard set as a standard component to ensure safety during maintenance work inside.
●Options added to make the booth even easier to use
　In addition to the existing BBL (normal fluorescent light model), BBD (safety-enhanced explosion-proof model), BBR (rear exhaust model), and BBH (high ceiling model), a manometer (differential pressure gauge) set for easily judging when to replace the primary and secondary filters can be added to all the models.
* The main body is changed from the coated one to an uncoated one (made of aluminum-zinc alloy-coated steel sheet).

Principle of the Collection Mechanism
　The V-type baffle plate serves as the primary filter that collects sprayed paint mists at the time of impact. The V-type baffle plate has its surface specially processed to enhance collection efficiency, and its internal structure causes most of paint mists to be collected on the surface. The secondary filter collects the remaining few paint mists that fail to be collected by the baffle plate.




BBL Models
Model with Normal Fluorescent Lamps
This booth is the standard baffle booth (7 models) equipped with normal
fluorescent lights.
Model BBL-15E BBL-20E BBL-25E BBL-30E BBL-35E BBL-40E BBL-45E
Fluorescent Lamps Qty 1 1 1 2 2 2 3
Fluorescent Lamps specs：200V 40W × 3 lamps
Vinyl Cab Tire Cable
Switch：N High Motor Breaker
※Caution: The BB-10E model is not equipped with fluorescent lights.


BBD models
Safety-Enhanced Explosion-Proof Models (with fluorescent lights)
All the electric components of the above BBL model are of the safety-enhanced
explosion-proof specifications. Note that the primary wiring and wiring for the
cover switch and other components must be done by the customer (dotted lines
in the figure below).
Model BBD-15E BBD-20E BBD-25E BBD-30E BBD-35E BBD-40E BBD-45E
Fluorescent Lamps Qty 1 1 1 2 2 2 3

Motor：Safety-Enhanced Explosion-Proof Type
Fluorescent Lamps specs.：200V 40W × 3 pcs
Wire：Waterproof Plica Wire
Motor switch：Pressure-Proof Explosion-Proof Type Magnet Switch
Fluorescent Lamps switch：Pressure-Proof Explosion-Proof Type Tumbler Switch
* Caution : Pressure-Proof Explosion-Proof Type Tumbler Switch


 
BBR Models
Rear Exhaust Models
This booth is the standard baffle booth (8 models) with a duct bent by 90 degrees for rear side exhaust.
The exhaust duct can be laid straight to the rear.
Model BBR-10E BBR-15E BBR-20E BBR-25E BBR-30E BBR-35E BBR-40E BBR-45E
Fan Height （Ａ） 400 400 400 400 470 470 470 470
Fan Center Height （Ｈ２） 2425 2425 2425 2425 2525 2525 2525 2525
Total Height （Ｈ） 2775 2775 2775 2775 2975 2975 2975 2975




BBH Models
High Ceiling Models
This booth is the standard baffle booth (7 models) with its hood located 500
mm higher. The exhaust fan is of the standard specifications.

Model BBH-15E BBH-20E BBH-25E BBH-30E BBH-35E BBH-40E BBH-45E
Hood Height （ｈ） 2500 2500 2500 2500 2500 2500 2500
Total Height （Ｈ） 2475 2475 2475 2545 2545 2545 2545

※Caution: The BB-10E model does not have a high ceiling.



Manometer (Filter Differential Pressure Gauge) Set
A manometer (filter differential pressure gauge) for measuring the filter differential
pressure can be attached to all of the standard and optional models.
Since the manometer has a pointer, you can identify when to replace the
filter at a glance by setting the relevant value on the pointer.


Notes on the Use of the Baffle Booth
< Types of Paint That Should Not Be Used >
Some types of paint may ignite spontaneously when their paint mists adhere to and
accumulate on the filter, baffle plate, etc. Do not use these types of paint for the baffle booth.

・Oil-based paint using boiled oil or linseed oil as solvent
・Oxidized polymer paint
Paint with a mixture of hardener, promoter, etc

・Fast-drying phthalate paint
Paint containing styrene to promote the drying process
・Other types of paint that may ignite spontaneously
If you remove baffle plates smeared with such paint and leave them piled
up, the paint may ignite spontaneously. Submerge the plates in water
immediately, and scrap them as industrial waste.

< Baffle Plate Compatibility >

・The conventional baffle plates (those bent in the form of the letter U for use)
cannot be mounted in the BB-E baffle booth.
・The new baffle plates (V-type baffle plates for the BB-E baffle booth) can also
be mounted in the conventional baffle booths (BB-D, etc.). For information
about the mounting method, see the package of the V-type baffle plates.
ANEST IWATA BB type dry coating booth
Model Sound level
Db(A)
FRNOT
1.5m		 Sound level
Db(A)
SIDE
1.5m		 Inlet
fan
dia.
mm		 Blowing rate
m3/min		 averagr of
wind velocity
m/sec		 Exhaust
fan motor
kW		 V-type baffle
plates
Qty		 Ait inlet filter
Qty secon-dary
side		 Mass
kg		 primary power source
（3 phase
200V）
circuit breaker
capacity
BB-10E 80 74 axial φ600 84 0.7 0.75 24 8 292 20A
BB-15E 76 69 axial φ600 122 0.68 0.75 36 12 316 20A
BB-20E 82 75 axial φ600 170 0.71 1.5 48 16 351 30A
BB-25E 82 75 axial φ600 198 0.66 1.5 60 20 375 30A
BB-30E 79 71 axial φ800 280 0.78 2.2 72 24 504 30A
BB-35E 79 71 axial φ800 281 0.67 2.2 84 28 530 30A
BB-40E 84 75 axial φ800 369 0.77 3.7 96 32 591 50A
BB-45E 84 75 axial φ800 367 0.68 3.7 108 36 616 50A
About collecting rate % (For reference only)
Melamine paint：96
Lacquer：92
Acrylic paint, Urethane paint (PU)：88

About exhaust fan：
Note : Wind velocity and blowing rate will be different as above cause of the
shape of ventilation duct.
Operating switch：Motor circuit breakers.

Standard accessory：user's Guide.