Shishido electrostatic, ltd., ESD solutions and productions.
Winstat BF-2ZC static eliminator blower
High frequency type
●When an ionizer is used continuously, the area around the emitter needles that are generating ions becomes dirty, causing a drop in the effectiveness of the static elimination process. In order to maintain effective static elimination, periodic cleaning of the emitter needles is essential. Shishido Electrostatic developed a proprietary automatic emitter needle cleaning function to solve this troublesome problem.
●An automatic emitter needle cleaning function is built in to automatically perform periodic cleaning of the emitter needles (once every 24 hours).
●The BF-2ZC features a built-in ion balance indicator to enable confirmation at any time of the correct balance between the positive and negative ions, as well as dramatically improved efficiency in maintenance and static elimination.
●Safety louver
The easily attachable/detachable louver facilitates product maintenance. The safety mechanism ensures that operation stops automatically when the louver is removed.
●Airflow adjustment
The airflow can be adjusted.
●Ion balance monitor
An ion balancer is built in (adjustment not required).
●HV alarm output
An LED indicator and an alarm output signal are provided to enable confirmation of whether or not the high-voltage transformer is in the normal operating status.
●Fan alarm output
An LED indicator and an alarm output signal are provided to enable confirmation of whether or not the fan is in the normal operating status.
●Tungsten emitter needle
Tungsten that was specially developed by our company is used in these emitter needles.
●Automatic emitter needle cleaning function
This function performs automatic periodic cleaning of the emitter needles (once every 24 hours).
| Model | BF-2ZC | ||||||
|---|---|---|---|---|---|---|---|
| Input power supply | DC24 V (with AC100 to 240 V AC adapter) | ||||||
| Electric consumption | Normal operation : 12VA While brush cleaning :17.5VA |
||||||
| Output voltage | AC2.0KV | ||||||
| Ion balance | ±10V or less (distance 300 mm; when shipped from the factory) | ||||||
| Airflow | 3.3m3/min | ||||||
| Ozone density | 0.02ppmor less (distance 150 mm) | ||||||
| Operating Environment | 0 to 40℃ / 15 to 65% RH (no condensation) | ||||||
| Filter | Pre-filter level | ||||||
| Main unit dimensions | 142×190×111mm（W×H×D） not including protruding portion and flame stand |
||||||
| Weight | Approx. 1800 g (including stand) | ||||||
| Noise level | 59dB（A） (distance 1m) | ||||||
| Output signal | • When the high-voltage output has fallen off • When the high-voltage output has short-circuited • When the fan motor has stopped (When Maximum Airflow) • When the turn of the cleaning brush does not stop. (MOSFET contact (NC), Rated Current: 100 mA, Maximum Allowable Voltage: 30 V DC) |
||||||