Shishido electrostatic, ltd., ESD solutions and productions.
Winstat BF-X2ZB-V2 static eliminator blower
High frequency type with cleaning check function.
●Thin and lightweight high-frequency corona discharge method fan-type ionizer.
●Louver and emitter needle easy to remove and replace.
●Can choose the area for static elimination with two types of louvers.
●Main unit angle can be adjusted and locked and the angle never changes due to vibrations.
●With detecting the abnormal discharge through the discharge emitter, it shows with C.C alarm LED and it links with signal output.
●Meets RoHS standards.(2002/95/EC)
●Safety louver
The easily attachable/detachable louver facilitates product maintenance. The safety mechanism ensures that operation stops automatically when the louver is removed.
●Airflow adjustment
The airflow can be adjusted.
●HV alarm output
An LED indicator and an alarm output signal are provided to enable confirmation of whether or not the high-voltage transformer is in the normal operating status.
●Cleaning Check [C.C] function
With detecting the abnormal discharge through the discharge emitter, it shows with C.C alarm LED.
●Tungsten emitter needle
Tungsten that was specially developed by our company is used in these emitter needles.
●Replaceable emitter needle
Replaceable needle
| Model | BF-X2ZB-V2 | ||||||
|---|---|---|---|---|---|---|---|
| Input power supply | DC24 V (with AC100 to 240 V AC adapter) | ||||||
| Electric consumption | 10VA | ||||||
| Output voltage | AC3,000V | ||||||
| Ion balance | ±10V or less (distance 300 mm; when shipped from the factory) |
||||||
| Air flow | 1.6m3～3.3m3/min | ||||||
| Air speed | 1.9～3.2m/sec(straight louver, distance 300 mm; centered) 0.7～0.9m/sec(wide-angle louver, distance 300 mm; centered) |
||||||
| Ozone density | 0.04ppm or less (distance 150 mm) | ||||||
| Operating Environment | 0 to 40℃ / 15 to 65% RH (no condensation) | ||||||
| Filter | Pre-filter level | ||||||
| indicator | Green：ON(POWER) Green：High Voltage Yellow：Cleaning Check（C.C） Red：High voltage (ALARM) |
||||||
| Output signal | Normally Close contact by MOS FET relay no voltage contact output | ||||||
| Main unit dimensions | 150×182×68mm（W×H×D）not including protruding portion | ||||||
| Weight | Approx. 820 g (with Bracket) | ||||||
| Noise level | 57dB（A）(distance 1m) | ||||||
| Accompanying items | Operation manual, AC adapter, wide-angle louver, signal output cable, cleaning brush | ||||||
| Optional parts | Discharge needle unit(DNU-W85), Filters (OBF-F2ZA-1-10:package of 10) |
||||||
