product description
Home/ Products/ ANEST IWATA /Painting Machine /Electrostatic Coating /Liquid Electrostatic Coating Equipment
Menu
ANEST IWATA
Painting Machine
ANEST IWATA EBG series reciprocator-mounted
ANEST IWATA Electrostatic Coating Equipment.
Reciprocator-Mounted Electrostatic Air Auto Gun (Direct Charging, Internal Boosting Type).
The highly efficient opposite electrode arrangement provides performance equivalent to -70 kV at -60 kV output.

Application
・Metal coating

・The highly efficient opposite electrode arrangement provides performance equivalent to -70 kV at -60 kV output. During spraying, the opposite electrode gets an air purge to prevent it from becoming dirty.
・The intermediate seat system allows the paint nozzle and pin electrode to be replaced while pressure is being applied on the paint.
・The cartridge-type paint valve is much easier to maintain.
・Since the low voltage cable is connected to the gun body with a connector, it is easy to replace the low voltage cable.
・Since the atomizing air circuit and pattern air circuit are separated, the pattern width can be adjusted remotely.


Flow control valve
●Flow control valve FCV－2B
Model Max work pressure
（primary pressure）		 Paint pressure
adjustment range
(secondary pressure)		 Flow rate range Mass
FCV－2B 0.7MPa 0.03～0.40
MPa		 300~1200
mℓ/min		 770g
●reciprocator-mounted type electrostatic automatic air spray gun EBG
Model Atomizing
type		 Fluid
nozzle orifice
φmm		 Spray
distance
mm		 Atomizing
air pressure
Mpa		 Air consumption
(incl. purged air)
ℓ/min		 Fluid
output
mℓ/min
（※１）		 Pattern
width
mm
EBG-210B Conventional atomization type 1.5 300 center：0.27
horn：0.27		 560 300 370
EBGL-210B Atomization with low pressure 1.8 250 center：0.17
horn：0.10		 520 300 300
Applied controller : E-SC12BH
Input voltage：AC12V
Output voltage：MAX　DC-60KV
Dimensions：357×125×150mm
Mass：2100g
Air nipple size：G 1/4
Fluid nipple size：G 3/8

Standard accessory：
Low voltage cable：10m（CEB-11510）（※２）
Air hose：Air hose for atomization：Outer φ8mm×Inner φ6mm×10m 2pcs（center, horn）
Air hose for actuation：Outer φ6mm×Inner φ4mm×10m 1pcs
Fluid hose：Electrostatic fluid hose set（EPH－410）：Inner φ4.5×10m
（fluid supply equipment side cap nut sizeG3／8）
（※１）：Paint viscoslty : 20 sec /NK-2.
（※２）：Other low voltage cable length : 15m、20m.