●A preset handle for paint flow adjustment is provided as a standard component.
●Solvent-proof material is used for the needle packing.
●A single-piece auxiliary lever/needle-chucking guide is provided as a standard component for easy disassembly and clean-up.
●A wide range of nozzle orifice bores, from 0.2 to 0.8 mm, are available.
| Model | Type of feed |
Fluid nozzle orifice φmm |
Cup Capacity mℓ |
Pattern type |
Atomizing air pressure MPa |
Operation type | Remarks |
| HP-AP | Gravity | 0.2 | 0.4 | Round | 0.10～0.29 | Double Action | - |
| HP-BP | Gravity | 0.2 | 1.5 | Round | 0.10～0.29 | - | |
| HP-SBP | Siphon | 0.2 | 1.5 | Round | 0.10～0.29 | Side Cup | |
| HP-CP | Gravity | 0.3 | 7 | Round | 0.10～0.29 | - | |
| HP-BC1P | Siphon | 0.3 | 20 | Round | 0.10～0.29 | Bottle Cup | |
| HP-EP | Gravity | 0.8 | 40 | Round | 0.10～0.29 | Center Cup | |
| HP-BEP | Siphon | 0.8 | 40 | Round・Flat | 0.10～0.15 | Bottle Cup | |
| HP-TBCP | Siphon | 0.8 | 40 | Round・Flat | 0.10～0.15 | Trigger Action | Bottle Cup |
